Dryer Vent Cleaning in Pasadena, CA

The usual trigger is a dryer that has quietly stopped doing its job: loads come out damp after a full cycle, the machine runs hot, or a second cycle becomes routine. In Pasadena's older housing, the cause is often the route, not the appliance: long or angled vent runs in Craftsman bungalows and larger estate homes give lint far more surface to cling to than a short straight run, and decades-old ducts may include crushed sections, sagging spans, or plastic flex that California no longer allows. We also hear from families running several loads a day, new owners who have no idea when the vent was last serviced, and short-term rental hosts near the Rose Bowl whose laundry turns over constantly and cannot afford a slow dryer — or the fire risk that comes with a packed duct.

Clothing still damp when a normal cycle ends

Dryer cabinet unusually hot while running

Scorched or stale odor in the laundry area during a load

Machine stops partway through a cycle on its own

Laundry room steamy or humid after use

More than a year since the vent was last cleaned

Our technicians clear the entire duct, not just the easy first section behind the machine. The visit covers:

• Complete lint removal along the full duct run, with rotary brush equipment and vacuum extraction
• Airflow measured before and after cleaning, so the improvement is a number, not an opinion
• A hands-on check for pinched, crushed, or separated duct sections along the way
• Duct material confirmed — with a written note if it is plastic or foil accordion flex, which California code prohibits for dryer exhaust
• Outside termination cap and flap checked: it must open freely when the dryer runs and close when it stops
• A short written summary of what was found and what needs attention next

Typical time: A typical cleaning takes 30–60 minutes; long or complicated Pasadena runs can take up to 90.

Lint is fuel: the U.S. Fire Administration counts roughly 2,900 dryer fires in American homes each year, and lint inside the duct is at the center of most of them.

A dryer vent inspection examines the full duct system with a camera and manual check — especially where it runs hidden behind walls or in crawlspaces.

It produces a written assessment of the duct's condition, an airflow measurement, length and equivalent-length calculations, and a fire hazard assessment, plus how much longer the machine takes to dry a standard load than a clean system would.

It maps the route and flags sections where lint has built up in bends, joints, or transition points.

When an inspection finds a problem, repair is usually straightforward: reconnect a separated joint, replace crushed or kinked duct with rigid metal, reseal a joint with heat-resistant tape, repair a damaged termination cap, or swap out non-compliant plastic or foil.

In Pasadena's climate, rigid aluminum ducts and exterior termination caps are the most common replacements — they wear out or get damaged.

New dryer vent installation starts with layout: a short path to an exterior wall with minimal bends, rigid aluminum duct with no more than 25 ft of equivalent length, and adequate clearance from the dryer.

We use rigid or semi-rigid metal ducting with stainless steel connections, and we know Pasadena code: a 4-inch rigid metal duct, approved dryer connectors, and exterior termination with a damper-equipped cap.

That matters most in larger and multi-family properties, where multiple dryers often share a common exhaust — and a shared exhaust needs a proper backdraft damper to keep contaminated air from re-entering the occupied space.

We clean dryer vents in every Pasadena neighborhood, including Craftsman bungalows in Bungalow Heaven and Madison Heights; Victorian homes in Prospect Park; mid-century properties near Caltech and the Huntington Library; townhouses and condominiums with shared laundry facilities; and larger rental and apartment buildings near the Rose Bowl.

Their vent runs are often the city's longest and most convoluted — which is exactly why they benefit most from a professional approach that maps the entire system and treats hidden areas as seriously as the parts you can see.

Cleaning

Standard Dryer Vent Cleaning — From $99

lint removal, airflow test, and inspection for standard duct runs

Long or Complex Duct Run — From $299

runs with multiple bends or over 15 ft equivalent length

Plastic-to-Metal Duct Upgrade — Quoted on-site

replacement of prohibited foil/plastic duct with rigid metal

Inspection

Standalone Dryer Vent Inspection — From $99

full duct inspection with written report

Inspection Included with Cleaning — $0 additional

performed and documented as part of every cleaning visit

Pre-Purchase / Real Estate Inspection — From $399

detailed written report suitable for real estate disclosures

Repair

Minor Repair (cap, damper, seal) — From $99

exterior cap replacement, damper repair, or joint resealing

Duct Section Replacement — From $149

replacing a kinked, crushed, or plastic section with rigid metal

Disconnected Joint Repair (accessible) — From $149

reconnecting a separated joint in an accessible location

Hidden Disconnection Repair — Quoted on-site

locating and repairing joint separations inside walls or crawlspaces

Installation

Standard Dryer Vent Installation — From $699

rigid metal duct run up to ~10 ft with exterior termination

Extended or Complex Run — Quoted on-site

longer runs, attic routing, or multiple-story installations

Plastic-to-Rigid Metal Replacement — Quoted on-site

removing existing non-compliant duct and installing proper metal duct

Dryer vent cleaning from $99

Repair from $99

New installation from $699

A full duct inspection is included free with every cleaning; written report provided

California code: rigid or semi-rigid metal duct only, 25 ft maximum equivalent length

NFPA 211 compliant service

Professional & insured technicians

Open Sun–Fri 8AM–10PM · Sat 10AM–10PM

• Service area: We provide mobile dryer vent service throughout Pasadena — ZIP codes 91101, 91103, 91104, 91105, 91106, 91107
• Areas covered: Bungalow Heaven, Madison Heights, Prospect Park, Old Town, and the Caltech, Huntington Library, and Rose Bowl areas
• Hours: Sunday–Friday 8:00 AM–10:00 PM · Saturday 10:00 AM–10:00 PM
• Call: (818) 301-4365
• Rated: 5.0 from 439 reviews